Yamaha Mg10xu

This topic is listed in Website Problems & Help. It has been viewed 121 times and 4 replies have been made.

turbolagLEVEL 48

Post by turbolagGOLD

Can someone please help me out I can not figure out how to get my Yamaha Mg10xu to work on the sing snap site do I have to have Pro tools or audacity or any other tools to get it to work I am waiting for a rca adapter to plug in my Logitech speakers so I can hear sound thru my computer I have everything ready to go I hear mixer when I connect headphones to it but can not run sound until I get the adapter could someone please send me information as to what I need to do when I get it thank you

Pepsi_3369

Reply by Pepsi_3369GOLD +1

Not sure if this link will help you but if not then I'm sure Steve-G would be able to help you.

http://www.singsnap.com/karaoke/forum/topic/ae10a59c

Steve-GLEVEL 91

Edited reply by Steve-GCHAT-ADMIN +1

Jeff what sort of computer are you running? In most cases you can hear sound through your headphones or speakers just by selecting the audio output on your computer sound card via recording devices/playback.

If you plan to switch from headphone to speaker through you mixer you need a 1/4 inch plug that adapts to what your speakers require. If they are true monitors it will be 1/4 inch thru. If they are computer speakers then they generally use a 3.5 mm so you will use a 1/4 inch to mini jack adapter.

https://imgur.com/a/KmKx9TL

This picture is of the mg10xu output section. It is the blue area. You can use the aux send jack which is mono out or you can use a 1/4 inch to 3.5mm TRS adapteror an XLR stereo splitter in either the monitor out or stereo out sends. https://imgur.com/a/UZLnP5v

This should solve your issue.

Steve-GLEVEL 91

Reply by Steve-GCHAT-ADMIN +1

Can someone please help me out I can not figure out how to get my Yamaha Mg10xu to work on the sing snap site do I have to have Pro tools or audacity or any other tools to get it to work I am waiting for a rca adapter to plug in my Logitech speakers so I can hear sound thru my computer I have everything ready to go I hear mixer when I connect headphones to it but can not run sound until I get the adapter could someone please send me information as to what I need to do when I get it thank youturbolag

turbolagLEVEL 48

Reply by turbolagGOLD

I am using a computer with Windows 10 pro installed. I use internet Explorer and Microsoft edge for getting on the internet don't have Pro tools or audacity or any other tools to record everything was connected to my Logitech audio sound card into my computer then out to my Logitech speakers that is my audio setup